Services / Products


TYPES OF SERVICES


  • SCAFFOLDING (ERECTION & DISMANTLE)
  • REMOVABLE BLANKETS/JACKETS
  • HEAT TRACING
  • STEAM TRACING
  • TANK INSULATION
  • HOT INSULATION SERVICE
  • COLD INSULATION SERVICE
  • RAPAIR & MAINTENENCE SERVICE
  • CHILLED INSULATION

For Example But Not Limited Too.


  • UTILITY SYSTEMS
  • PERSONAL PROTECTION
  • FREEZE PROTECTION
  • STORAGE TANKS
  • H VAC SYSTEMS
  • PLUMBING SYSTEMS
  • CONDENSATION CONTROL
  • PATCHING/REPAIR
  • MAINTENANCE WORK
  • STEAM LINES
  • WATER CHILL LINES
  • REFRIGERATION SYSTEMS


PRODUCTS


We carry a wide range of products to suit a variety of budgets and tastes. Our most popular products are shown below. Please call or stop by for more information on products, and or custom options.


Micro-Lok HP (FIBERGLASS) MEDIUM/HOT TEMP
Micro-Lok Hp Fiberglass pipe insulation is a high performance insulation made from rotary glass fibers bonded with a thermosetting resin. Used on standard iron pipe and copper tubing. Fiberglass is used from -20⁰F to 1000⁰F. Factory Applied Tape System permits installation at ambient temperatures down to 20⁰F (-7⁰C) , and will not soften or separate when exposed to high ambient temperatures and humidity.
THERMO 12 GOLD (CALCIUM SILICATE) HOT TEMP
Calcium Silicate is very resistant to mechanical abuse, and is highly recommended where mechanical abuse is expected. Calcium Silicate is used from +70⁰F to +1200⁰F. Because of its low thermal conductivity, durability, compressive strength and corrosion inhibiting properties, it is the preferred product for application on high temperature piping and equipment. THERMO 12 GOLD does not burn and may be used for fire protection in some applications.
XPS Extruded Polystyrene Insulation (Styrofoam) LOW TEMP
Styrofoam used in demanding cold service applications, no other insulating material can equal the performance of Styrofoam. The rigid, closed-cell structure of Styrofoam gives it high compressive strength, low friability, and excellent resistance to water absorption from freeze thaw cycling. Styrofoam used from -297⁰F to 165⁰F. Highly recommended for cold service piping and equipment.
Cellular Glass (Foamglass) LOw Temp
Used Where organic material cannot be used, Does not Absord Oil/Water, may require thicker layers to provide thermal efficiency,Good for Services that cycle from Hot to Cold From -450⁰F to 800⁰F it has medium resistance to mechanical abuse and recommended for outdoor piping where insulation may exposed to wet surfaces.
AF/Armaflex (Armaflex,Rubber,Armacell) MEDIUM/LOW TEMP
Armaflex is a flexible thermal insulation with a closed-cell Electrometric foam that can reduce or eliminate conditions amplifying biological contamination and bio aerosols in commercial air conveyance systems. Engineered to control condensation, Armaflex has a very low rate of water absorption. Can be used in temperatures up to 250⁰F.
Mineral Wool
Mineral wool Used in Temp from 120⁰F to 1200⁰F Very Similar to Fiberglass exept it is rated for higher temp usage and provides excellent thermal insulation performance for power and process systems made of inorganic fibers derived from basalt, a volcani rock, with a thermo setting resin binder. For Excellent Performance in high temperature thermal control and fire resistance applications.
RockWool Rigid Wrap/Tank Wrap
Fiberglass Tank Wrap insulation is a high performance insulation made from rotary glass fibers bonded with a thermosetting resin. Used on Tank and Large diameter Piping. Fiberglass is used from -20⁰F to 1000⁰F. Factory Applied Tape System permits installation at ambient temperatures down to 20⁰F (-7⁰C) , and will not soften or separate when exposed to high ambient temperatures and humidity.
PVC JACKETING
Johns Manville Zeston 2000 PVC jacketing is applied to pipe insulation in conjunction with Zeston PVC fitting covers
Aluminum Jacketing (stucco)
RPR Aluminum Roll Jacketing is applied to pipe insulation in conjunction with RPR Aluminum Fitting Covers.
Aluminum Elbows
ITW/RPR Aluminum elbows is applied to pipe elbows in 90/45 degree forms.
Aluminum Jacketing (smooth)
RPR Aluminum Roll Jacketing is applied to pipe insulation in conjunction with RPR Aluminum Fitting Covers.